Products & Services

   Cell Phone Repair
   Tablet Repair
   Laptop Repair
   Cell Phone Parts
   Laptop Parts
   AC Adapter
   Battery
   Laptop Accessories
   Cell Phone Unlock
   Unlock Instructions
   Downloads
   LCD Digitizer
   Phone Charger
   iPhone 4 / 5 Cases
   Samsung Galaxy
   LCD Swap
   Fonts
   Borders
   Protector Films
   Tempered Glass
   TV Repair
   TV Box
   TV Parts
   Video Accessories
   Game Console Repair
   Repair Tools
   Audio Accessories

Cell Phone Unlock Guide

Unlocking Instructions for Most Phones

Insert the sim card you want to use the phone with. The phone will prompt you for a code. Enter the code and the phone will be unlocked. If the phone does not prompt you for a code then please search the page below for instructions for your brand or model.

AT&T iPhone Unlock Instructions

1. Install latest version of iTunes
2. Connect phone to iTunes with not accepted (Not an AT & T) simcard
3 Wait until iTunes detect phone
4. Now disconnect phone and reconnect after 10 seconds.
5. Messages in iTunes: "Unlock Complete. Congratulation."

Back up your iPhone:
http://support.apple.com/kb/HT5014

Back up your iPhone.

Erase the contents of your iPhone.

Swap the old SIM card with the one for the new carrier.

Complete the setup assistant and restore your backup.

Additional Information:

Follow the steps below if you experience issues or receive the following error message displayed in iTunes or on your device:"The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier store."

Restore your iPhone.

BlackBerry Unlock Instructions

WARNING: If your phone says you have less than 2 tries left, DO NOT attempt to enter a code. Instead, please follow instructions to read MEP and IMEI on this page:

http://www.a-32.com/BlackBerryMepReader.php

If you get a "Code Error" for any BlackBerry please also see this page.

Notice: If the phone shows '0' tries remaining, your phone has already been hardlocked and cannot be unlocked by code. Even if you correctly enter the code your phone will still say "Code Error, Please Wait...".

If your phone shows '10' tries remaining every time you enter the code and you get a code error it means your phone is already unlocked.



How to unlock BlackBerry Curve 8900 phone:


Power on With Activated GSM Sim Card

1. Scroll to and select the Manage Connections icon.
2. Select Turn All Connections Off.
Press the red End key
3. Scroll to and select the Settings icon
4. Scroll to and select the Options icon
5. Scroll to and select Advanced Options
6. Scroll to and select SIM Card
7. Type MEPD Note: When Typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device. Notice under Network, it will say Active.
8. Type MEP2 (For ??, press the ALT key then 2)
Note: When Typing in MEP2 the letters will not appear on the screen.
9. Notice the Enter Network MEP code box.
Enter the Unlock code
Press the Trackball or Enter key (once one of these keys is pressed the device should display "Code Accepted".



Unlocking Instructions for BlackBerry Curve 8530 (Gemini)


How to Unlock BlackBerry Curve 8530: (Gemini)


1. Power ON your BlackBerry Curve 8530 (Gemini) with any SIM Card.
2. Scroll and select Manage Connections.
3. Select Turn All Connections OFF.
4. Press Escape to go back to the Home Screen.
5. Go to Options menu and select Advanced Options.
6. Click on SIM Card.
7. Click on Show keyboard.
8. Hold the ALT key while typing MEPD. You will not see text appear on screen while typing. This opens up a personalization menu.
9. Hold the ALT key while typing MEP2. You will not see text appear on screen while typing.
10. Press ALT and 2 simultaneously to get number 2.
11. You should be presented with a prompt Enter Network MEP Code.
12. Enter Unlock Code.
13. After entering the code press the Trackball once.
14. Restart your BlackBerry Curve 8530 (Gemini) and restore connections by following the first two steps.
15. Your BlackBerry Curve 8530 (Gemini) is now Unlocked.
Phone Unlock Instructions for BlackBerry Bold (9000), 8800, 8820, Curve (8300, 8310, 8320), Gemini (8520, 9300), & Onyx (9700):

Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!



How to Unlock BlackBerry 9780


1. Insert accepted (carrier) SIM card
2. Power on the handset (wireless option should be off)
3. Scroll to Options and press the trackpad
4. Scroll to Device
5. Select Advanced System Settings
6. Scroll to SIM Card and press the trackpad
7. Type MEPD (NOTE: You will not see any text appear on the screen while typing MEPD)
8. Type MEP2 (2 is alt + E)
9. You should be presented with a prompt "Enter Network MEP Code".
10. Type in the unlockcode
11. Press the Enter Key
"Code Accepted!"
12. Device is unlocked!


How to unlock AT&T BlackBerry Torch 9800 phone:

a)
- Put an not accepted simcard in your phone and turn it on.
- The phone will ask if you want to enter an unlock code (aka MEP Code)
- Click Yes- Enter the unlock code and press enter
- Phone is now UNLOCKED!
- Go to "Manage Connections" and turn Mobile network on

b)
1. Go to Options -> Device
2. Select advanced system settings => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code and press in the track wheel / jog dial to confirm Your BlackBerry Torch 9800 phone is now successfully unlocked!



Phone Unlock Instructions for Rogers 9800 Torch:

Must be done without a sim card inserted & wireless radio must be turned off. To turn off the wireless radio, Scroll to and select the Manage Connections icon. Select Turn All Connections Off. Press the red End key. Make sure the phone is not displaying the low battery warning!

There are 2 ways that you can unlock the phone:

To unlock BlackBerry Torch 9800 phone:

a)
- Put an not accepted simcard in your phone and turn it on.
- The phone will ask if you want to enter an unlock code (aka MEP Code)
- Click Yes- Enter the unlock code and press enter
- Phone is now UNLOCKED!
- Go to "Manage Connections" and turn Mobile network on

b)
1. Go to Options -> Device
2. Select advanced system settings => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code and press in the track wheel / jog dial to confirm our BlackBerry Torch 9800 phone is now successfully unlocked!


Phone Unlock Instructions for Bell Canada 9700 (Bold 2 Onyx):

Note: You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the mep2 code. Enter it and then press trackball to confirm.
8) After getting message 'Code Accepted', HOLD ALT and press the following: mep4 (Please note that you will NOT see what you type on the screen)
9 It will ask you for the mep4 code. Enter it and then press trackball to confirm. You phone is now unlocked!



Phone Unlock Instructions for Telus Canada 9700 (Bold 2 Onyx):

Note: You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep4 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!



Phone Unlock Instructions for BlackBerry Pearl (8100, 8110, 8120, 8220):

Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked! 

 

Phone Unlock Instructions for BlackBerry 8830:

Notice: If the phone shows '0' tries remaining, your phone has already been hardlocked and cannot be unlocked by code. Even if you correctly enter the code your phone will still say "Code Error, Please Wait...".

SIM is REQUIRED to unlock the phone. SIM card can be inactive, it does not need to be activated. After your phone is unlocked, remove the battery, insert the SIM card you want to use and re-insert the battery. Phone MUST be restarted to use the new SIM card.


AT&T and T-Mobile WILL NOT work: This is a dual-band phone, it WILL NOT work in North America but will work fine in Europe, Asia, South America, and anywhere else where they use the other set of frequencies.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!


If your phone shows '10' tries remaining every time you enter the code and you get a code error it means your phone is already unlocked.

 

Phone Unlock Instructions for BlackBerry 8700/8700c/8700g:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mepe (Please note that you will NOT see what you type on the screen)
6) It will ask you for the unlock code. Enter it and then press jog dial to confirm and your phone is unlocked! 

 

Phone Unlock Instructions for BlackBerry 7105t:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power phone on and turn off the radio (Turn Wireless Off option)
2) Go to Tools
3) Go to Settings
4) Go to Options and select Advanced Options
5) Go to SIM Card
6) Type "MEPPD" (please note that you will not see what you type on the screen)
7) HOLD ALT and press mepp2
8) Enter the Unlock Code
9) Press enter (press on Trackball)
10) Reboot device. Device is now unlocked 

 

Phone Unlock Instructions for BlackBerry 7100/7130/7130c:

Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

BlackBerry 7290 Unlock Code Instructions:


1 - Switch ON your Blackberry 7290 with your current network/service provider's SIM card.
2 - Using the menu go to Settings Menu -> SIM card and press select.
3 - While holding the SHIFT key, type mepd.(NOTE: You may not see any text appear on the screen while typing mepd)
4 - You should now see the five locking categories listed.
5 - While holding the SHIFT KEY, type mep2.(NOTE: You may not see any text appear on the screen while typing mep2).
6 - Release the shift key.
7 - You will now be prompted to enter the Network MEP code. (it will also state how many attempts left)
8 - Enter the Unlock Code.
9 - Enter Return/Enter.
10 - The Blackberry 7290 should then be unlocked.




Phone Unlock Instructions for Blackberry 5xxx, 6xxx, 7xxx (Except for 7100):

Note: After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Options.
3) Scroll to SIM CARD then press jog dial in once to select it
4) HOLD ALT (Half moon key on the lower left side) and press: mepe (Please note that you will NOT see what you type on the screen)
5) It will ask you for the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked! 

 

Phone Unlock Instructions for Blackberry Vodafone Storm (9500):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Go to Settings, then Options, then Advanced Options, then SIM Card
7) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
8) Type in mepd (Please note that you will NOT see what you type on the screen)
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
10) Enter the code, Remember you ONLY have 10 chances to get it right
11) Press enter and your phone is unlocked! 



Phone Unlock Instructions for BlackBerry Storm or Storm 2 (9530, 9550):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
For Unlocking Storm 2: Try the unlock process with a SIM card besides Verizon
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Inside Settings menu, Click Options, then Mobile Network, on the switch technology to 'Global' if that has not been done.
Exception: If phone prompts 'Would you like your Blackberry to automatically select CDMA or GSM based on network availability', select No.
7) Now click the Back Arrow Button (Next to the Red End Call button) and select Advanced Options and then SIM Card
8) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
Exception: If nothing is prompting up and you are making sure you are selecting each button by press the screen in, do a wipe handheld to reset the phone to manufacturer default: http://forums.crackberry.com/showthread.php?t=110075
10) Enter the code, Remember you ONLY have 10 chances to get it right
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is a glitch on the phone
11) Press the Enter key (Button that looks like a backwards L arrow)
12) A message will appear saying Code Accepted
13) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
14) Turn the phone back on
15) Go to Settings, then Options, then Mobile Network, on the third row switch Network Technology to GSM/UMTS.
16) Press the Back Arrow Button to exit and save settings.
17) Return to the main screen by pressing End Call and you should see your phone getting signal
18) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.

Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated



Phone Unlock Instructions for BlackBerry Tour (9630):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings
5) Go to Options
6) Go to Advanced Options
7) Go to Sim Card
8) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
9) Enter the code, Remember you ONLY have 10 chances to get it right
10) Enter it and then press trackball to confirm and your phone is unlocked!
11) A message will appear saying Code Accepted
12) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
13) Turn the phone back on
14) Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS.
15) Set Network Mode to 3G & 2G.
16) Press the Back Arrow Button once to exit and save settings.
17) Inside the Manage Connections, set Mobile Network to on.
18) Return to the main screen by pressing End Call and you should see your phone getting signal
19) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.

VERIZON TOURS ONLY: Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated

SPRINT TOURS: If you need to remove the Activation Required, you will need to get the MSL code to remove it. Contact me on costs.

nbsp;

How to Enter MSL Code on Sprint BlackBerry Tour (9630):

1) From the mainscreen of the BlackBerry, press the green call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear



Blackberry 9650 Unlocking Instructions

Note:
NO SIM is needed to unlock the phone.
After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery.
Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen) *
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

* If your phone is a 9700 or 9000 that requires a second code (ie.Bell), please repeat until step 6 and press mep4 to enter the second code.
* Put your phone into GSM mode first, then when you press mepd, you will get a prompt
9650 Troubleshooting for signal issues:

1. Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS
2. Set Network Mode to 3G & 2G.
3. Press the Back Arrow Button once to exit and save settings.
4. Inside the Manage Connections, set Mobile Network to on.
5. Return to the main screen by pressing End Call and you should see your phone getting signal
6. As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again




How to Unlock BlackBerry Bold 9900 and 9930

  1. Ensure a SIM Card is inserted
  2. Go to "Manage Connections"
  3. Click on "Turn All Connections Off"
  4. Go to "Options"
  5. Click on "Device"
  6. Click on "Advanced System Settings"
  7. Click on "SIM Card"
  8. Type "MEPD"(NOTE: you might need to type in caps, also letters will not appear on-screen but you will be presented with personalization screen, that will display 5 locks such as network, service provider etc)
  9. Type "MEP2" (make sure to hold ALT for 2) or hold ALT and type MEPE (NOTE: user will be prompted to enter MEP code)
  10. Enter the MEP2 code numbers only (CONFIRM you get "Code Accepted" message)
    • *If you also have a MEP4 code, type "MEP4" (you will be prompted to enter MEP code)
    • Enter the MEP4 code (CONFIRM you get "Code Accepted" message)
  11. Reboot device by pulling battery out
  12. Go to "Manage Connections"/li>
  13. Click on "Restore Connections"/li>
  14. Device is now unlocked
Verizon phones only: You might need to remove "Activation Required" on the screen or change the Phone Number to yours by following steps below:
  • Press Call (Green Button) as you would to place a call
  • Type on the screen: ##000000
  • Press the Call Button
  • You will be prompted to the screen with the phone number, change existing phone number to yours
  • Press the Menu Button to Save the options and the phone will automatically restart
  • After restarting, it will be updated


HP Unlock Instructions



Phone Unlock Instructions for HP Glisten 3G, 6500, 6510, 6515, 6945, HW6510, HW6515, HW6920, HW6925:

1) Insert NON Cingular SIM into device
2) Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3) Enter the unlock code in the blank field
4) Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5) Press Ok



HTC Unlock Instructions



HTC Inspire 4G Unlocking Instructions

1. Insert a not accepted SIM Card and turn ON your AT&T HTC Inspire 4G.

2. Your AT&T HTC Inspire 4G should show "Enter Special or Subsidy Code".

3. Enter the Unlock code

4. Your AT&T HTC Inspire 4G phone is now successfully unlocked!
Unlocking Instructions for T-Mobile MyTouch 4G

How to Unlock T-Mobile myTouch 4G:


Insert a not accepted SIM Card and turn ON your T-Mobile MyTouch 4G.


A dialogue screen will prompt you to enter the Unlock CODE.


The box will say:
Title: Special Code Required
Dialog: Enter Code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel
In the upper right corner, the SIM is flashing where the signal strength should be. On entering the Unlock CODE, a dialog box comes up saying "Authenticating Code".
In case you see the "Waiting for Activation Screen", hit the Menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.

Your T-Mobile MyTouch 4G is now unlocked!

OR


Insert a not accepted SIM Card and turn ON your T-Mobile MyTouch 4G.


Your T-Mobile MyTouch 4G will prompt for Unlock CODE.


Enter UNLOCK CODE.


Your T-Mobile MyTouch 4G is now unlocked!

Phone Unlock Instructions for G1, G2, 2125, 3125, 8100, 8125, 8525, 8925 (Tilt), P4600 (Fuze), Dash, Dash 3G, Wing, Shadow, Excalibur 100, MDA, SDA, Touch Pro 2 (TP2), myTouch 3G, Magic:

1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone Unlocked



How to obtain IMEI for Verizon HTC?

Follow the following direction:

1. Start>Settings>Phone> Networks

. Change from Global to GSM only.

3. Go back to the home screen.

4. Type *#06# and Call key.




Phone Unlock Instructions for Verizon HTC Ozone, Imagio, Touch Pro 2:

1) Power on
2) Go to Settings
3) Go to Phone
4) Go to Network
5) Put phone on GSM mode
6) Go to Security
7) Go to Select SIM Manager
8) Go to unlock SIM
9) Phone will prompt for a code, enter the unlock code and press OK

Unlocking Instructions for HTC Aria:



1. Insert a not accepted SIM Card and turn
ON your Verizon HTC
2. When prompted, enter unlock CODE you received.

Attention! Use the onscreen keyboard and make sure that wireless mode is OFF.

3. Your HTC Aria is now unlocked!

If you see a message Sim lock. You can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. The only solution in this case is to upgrade phone's ROM which will reset the counter and allow to enter the code.

Unlocking Instructions for HTC HD2

How to enter unlock code for HTC HD2
Use the onscreen keyboard and make sure that wireless mode is OFF.

1. Insert a NON ACCEPTED SIM Card(DIFFERENT GSM SIM CARD THEN THE SERVICE PROVIDER THE PHONE IS CURRENTLY LOCKED TO) and turn ON your HTC HD2.

2. When prompted, enter unlock CODE you received.

3. Your HTC HD2 is now unlocked!

HTC 7 Surround Unlocking Instructions
1. Input a non accepted SIM card
2. Phone will display enter "SIM network unlock PIN"
3. Input the unlock code that was emailed to you
4. Phone is unlocked!
If you see a message Sim lock. You can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. The only solution in this case is to upgrade phone's ROM which will reset the counter and allow to enter the code.

nbsp;

At the manufacturer website find your model:

http://www.htc.com/www/support.aspx

Huawei Unlock Instructions

Huawei Comet U8150 Unlocking Instructions

1. Insert a non accepted SIM card
2. Phone will ask for an unlock code
3. Enter code that was provided by us

OR

1. Open Hyperterminal : C:\Program Files\Windows NT (should be there)
2. You must set com port on modem (Huawei Mobile Connect ?3G Modem)
3. Type following command : AT^CARDLOCK=?lt;you unlock code>?br /> 4. Validate by pressing Enter.



LG Unlock Instructions

LG GS170 Unlocking Instructions
1. Turn on your LG GS170 with original SIM card
2. Enter 2945#*710#
3. A menu will pop up, select SIM unlock
4. Enter your unlock code and press OK
5. The phone will then reboot and your LG GS170 is unlocked!


LG GT360 UNLOCK INSTRUCTIONS
1- Insert original SIM card(original sim card means the same service provider the phone is currently locked to) and power on your phone.
2- Dial 2945#*71001#on your LG GT360 keypad.
3- SIM Unlock mode displays.
4- Enter Network Unlock Code and press OK. Restart the phone.
Your LG GT360 mobile phone is unlocked
Unlocking Instructions for LG GT365 Neon



How to unlock LG GT365 Neon

  1. Insert a not accepted SIM Card and turn ON your LG GT365 Neon.

  2. Your LG GT365 Neon will display "phone restricted".

  3. Select Cancel

  4. Your LG GT365 Neon will display "phone restriction code".

  5. Enter the Unlock CODE

  6. Select OK

  7. Your LG GT365 Neon is now unlocked!
LG p500h Optimus Unlocking Instructions:

1. Power ON your phone with not allowed sim card (one that didn't come with the phone)
2. Type 2945#*500# or *2945#500# or *2945#*500#
3. the phone will ask you to input the unlock code, just input the unlock code
4. Device is now unlocked



LG p509 Optimus Unlocking Instructions:

1. Power ON your phone with not allowed sim card (one that didn't come with the phone)
2. Type 2945#*509# or *2945#509# or *2945#*509#
3. the phone will ask you to input the unlock code, just input the unlock code
4. Device is now unlocked



To unlock your LG Vu Plus GR700 phone:


1. Put a AT&T or Cingular SIM or any sim card other than original one in your LG Vu Plus; it does not have to be an active SIM
2. Dial *#865625# and then press Send
3. Message Displayed: SIM Unlock Process, Tap "OK"
4. Select "Unlock SIM"
5. Select "Network Unlock"
6. Enter the 16 digit unlock code, Select "OK"
7. Re-enter the 16 digit unlock code, Select "OK"
8. Device should say: Network Lock Deactivated

Your LG Vu Plus phone has been unlocked successfully. The Phone may automatically reboot



How to enter unlock code LG PRIME GS390 :


1- Power phone ON with a non-accepted SIM card
2- Select Unlock
3- Phone will indicate phone is locked
4- Press Yes
5- Dial unlock code and press OK
6- Phone will ask for the unlock code again, dial same code and press ok
7- Phone is unlocked

or


1- Power phone ON with accepted SIM card
2- Dial 2945#*390#
3- Select unlock menu
4- Dial unlock code, press OK

or

1- Power phone ON with accepted SIM card
2- Dial *#865625#
3- Select unlock menu
4- Dial unlock code, press OK

LG Phoenix P505 Unlocking Instructions:

1. Input a non accepted simcard

2. Phone will display enter "Sim network unlock PIN"

3. Input the unlock code that was emailed to you

4. Phone is unlocked!


How to insert the Unlock CODE into your LG 420G:




1. Insert a not accepted SIM Card and turn ON your LG 420G.
2. Your LG 420G will display "phone restricted".
3. Select Cancel
4. Your LG 420G will display "phone restriction code".
5. Enter the Unlock CODE
6. Select OK
7. Your LG 420G is now unlocked!
How to Enter Unlock Code on LG CU320:

1) Power on the handset
2) In Idle screen, input the special code "277634#*#".
3) Enter the SIM Unlock code
4) Access the submenu "SIM Test" in Phone Test Mode.
5) Input the special code "2945#*#".
6) Access the submenu "SIM Unlock" which is just activated after the special code.
7) Input the 8-digit Unlock code in the "Enter unlock code" input screen.
8) It will be unlocked.

 

 

How to Enter Unlock Code on LG CU400/CU405:

1) Insert non-Cingular SIM card"
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter 159753#*#
4) Enter the 8 digit SIM Unlock code
5) Select "OK".
6) The handset will be unlocked. 

 

How to Enter Unlock Code on LG CU500:

1) Insert non-Cingular SIM card.
2) Power on the handset. Phone will display "Invalid SmartChip"
3) (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4) In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5) Enter the 8 digit SIM unlock code
6) Select "OK"
7) The handset is now successfully unlocked. 

 

How to Enter Unlock Code on LG CU515:

1) Insert non-Cingular SIM card
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter *#865625# then select option 1 and then again select 1
4) Enter the 16 digit SIM Unlock code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked. 

 

How to Enter Unlock Code on LG CU575 (Trax):

1) Put a non-Cingular sim in the phone
2) Phone says invalid smart chip
3) Now enter *#865625# then select option 1 and then again select 1
4) Enter your 16 digits code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked. 

 

How to Enter Unlock Code on LG CU720/TU720 (Shine):

1) Insert At&t SIM card
2) Power on the handset
3) Type *#865625#
4) the phone will ask you to input the unlock code twice, just input the unlock code
5) Device is now unlocked

If Above does not work

Try using a non-allowed SIM card (SIM that didn't come with the phone) and do the same steps for 2, 3, 4 & 5. 

 

How to Enter Unlock Code on LG CU915/CU920 (Vu):

1) Insert At&t SIM card
2) Power on the handset
3) Type *#865625#CODE (CODE is the code we provided you) 

 

How to Enter Unlock Code on LG C2000:

1) Insert non-Cingular SIM card
2) Power on the handset - phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM Unlock code
5) Select "OK" - the handset is now successfully unlocked 

 

How to Enter Unlock Code on LG CT810 (Incite):

1) Dial this into the LG Incite's phone menu
2) 2945#*810#
3) Press CALL.
4) It should you ask you for the code. 

 

How to Enter Unlock Code on LG CB630 (Invision):

1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code. 

 

How to Enter Unlock Code on LG GR500 (Xenon):

1) Turn on the phone to the main screen (Insert AT&T SIM Card)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code. 

 

How to Enter Unlock Code on LG GT365 (Neon):

1) Turn on the phone to the main screen (Insert AT&T SIM Card)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code. 

 

How to Enter Unlock Code on LG KE970 (Shine):

1) Switch ON your phone with an allowed SIM card
2) Then compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code. How to Enter Unlock Code on LG TU330

1- Insert original SIM card and power on your phone.
2- Dial 2945#*71001# OR *#865625#on your LG TU330 keypad.
3- Select Unlock USIM, then select Network Lock.
4- Enter Network Unlock Code and press OK. Phone will restart.
Your LG TU330 mobile phone is unlocked.
How to Enter Unlock Code on LG TU500:

1) Insert an Invalid SimCard
2) When 'invalid smartcard' appears, compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code.

How to unlock LG Gossip Gw300FD (FIDO or Rogers)

You will need to first insert the Original simcard (FIDO or Rogers)
Turn the phone on
Press 2945#*71001#
You will see "SIM Unlock process"
Select option 1, "Unlock USIM"
When you press unlock message will come "Press Yes to unlock"
On the Right side press "YES"
Again select "Unlock"
Screen will give option "Network Lock"
Select Unlock (Left button)
When you press unlock message will come "Press Yes to unlock"
Select YES (Right button)
Again select "Network Lock"
Screen will display "You are about to sim unlock your phone continue?"
Select "Continue" (Left button)
Message will display "Press yes to unlock"
Select "YES" (Right button)
Same message will display again.
"You are about to sim unlock your phone continue?"
FINALLY you will be shown after all this patience,
Unlock attempt 1 of 10, Enter Unlock code
Enter the Unlock code for the LG Gossip GW300FD
You will see "Your phone is unlocked"

 

LG P930 Unlock Code Instructions:
1. Turn on phone with a non-accepted SIM card
2. Phone will prompt you for unlock code
3. Enter code that we provided
4. Your phone is unlocked!
or
1. On the dial pad press 2945#*930#
2. Phone will ask you to enter the Network Unlock Pin
3. Input the 16 digit Unlock code we emailed to you
4. Phone is now unlocked!
* Some models may require a service provider code (SPCK code)
LG MyTouch Unlocking Instructions:

1. Turn on phone with a non-accepted SIM card

2. Dial 2945#*800#

3. Menu will pop up and show Network Lock, Service Provider Lock, Network Subset Lock,
Corporate Lock, Sim/USim Lock

4. Select Network Lock

5. Enter NCK unlock code Click Done

6. Your phone is unlocked

* Some models may require a service provider code (SP code)



How to Unlock LG (Other models not listed, Example:CE110, CF360, CG180, CG225, C1300, C1300i, C1500):

1) Insert not-allowed SIM card
2) Power on the handset- phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM unlock code
5) Select "OK" - the handset is now successfully unlocked

Please Note: If having issues unlocking the CF360, use the instructions listed for the LG GR500 (Xenon)



Motorola Unlock Instructions

Phone Unlock Instructions for Blackflip, C139, v180, v190, v551, v557, v365, v3, v3i, v3r, v3re, v3xx, v3xxr, v3 RAZR, v8 RAZR 2, K1 (KRZR), K2 (KRZR2), VA76r (Tundra), v6, v8, v9, v9x, S9, SLVR, SLVR 2, c168/c168i, L2, L6, L7, Q/Q9H, MPX220, w233 Renew, w450 ACTV, w490, Z3, Z6, Z8 Rizr, Z9, Tundra VA76r, or any other Motorola Phone:

1) Switch ON your phone with a not allowed SIM Card
2) Phone should show 'Enter Special or Subsidy Code',
3) Enter unlock code
4) Your phone is now unlocked.

WARNING: if any of these messages appear :
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special Code"
- or "Contact Service'


It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!

Issues with Q700 Motorola Slide Unlock Codes
If receive message: "WAITING FOR ACTIVATION A welcome screen will appear within 48 hours after purchase. If does not, call Custumer Care to check your account status. Until then, press menu to place emergency calls," you will need to press menu and the letter "L" at the same time, and the phone will be working.

How to enter unlock code for Motorola A1000 and other A models
1- Power on phone with accepted SIM card
2- Dial **57*
3- Prompt to enter code will appear. Dial unlock code and press OK

How to enter unlock code for Motorola Z8
1- Power phone on with accepted SIM card
2- Dial **057*Code

How to enter unlock code for Motorola L6i and L7i only
1- Press and hold "*" key and dial 787090
2- Phone will show "Menu. Network"
3- Select Yes, press OK
4- Enter unlock code at prompt

How to enter unlock code for Motorola Cliq / MB200
1- Power phone on with no SIM card
2- Dial #073887*
3- Menu to dial in code will appear
4- Dial unlock code provided and press OK

Unlocking Instructions for Motorola ATRIX 4G

How to enter unlock code for Motorola ATRIX 4G

1. Insert a NOT Accepted Activated SIM Card and turn ON your Motorola ATRIX 4G.

2. Your Motorola ATRIX 4G should show "Enter Special or Subsidy Code".

3. Enter the Unlock CODE

4. Your Motorola ATRIX 4G is now unlocked!
-----------------------------------------------
If your phone is on a 3G network enter **057*
Then another window will appear to enter the Unlock CODE

Nokia Unlock Instructions

Phone Unlock Instructions for Nokia (all models except Lumia):

At&t/T-mobile Nokia Phones, compose: #pw+CODE+1#
Rogers/Fido Canada Phones, compose: #pw+CODE+1# or #pw+CODE+7#

1) Remove SIM CARD
2) Type #
3) Then press the * key 3times (you should get a "p")
4) Then press the * key 4times (you should get a "w")
5) Then press the * key 2times (you should get a "+")
6) Enter unlock code sequence
7) Then press the * key 2times(you should get a "+")
8) Then enter: 1 or 7 (For your appropriate phone)
9) Enter: #

Nokia Code Error Solution: If you get a code error on the phone that says "Cannot Undo Restriction" or "Not Allowed" please click here for the solution.

Nokia Lumia Instructions:

There are two methods to choose from to unlock your Nokia Lumia Device:

a) With a Non-Accepted SIM Card:

1. Insert a non-accepted SIM card
2. Turn on the handset. Note: the phone will display a message, "This SIM Card can only be used on specific networks. Contact your Customer Service Center for the unlock code. 10 attempts remaining."
3. Enter the 8 digit Unlock Code that was provided
4. Click on the Enter Key (device should read "PIN Accepted")

b) With a T-Mobile SIM Card in the phone:

1. Click on Phone Button from the Home Page
2. Next click on the Keyboard
3. Enter in: ##782#
4. Call Button (a box will appear to enter the PIN for unlocking)
5. Enter the 8 digit Unlock Code
6. Click on the Enter Key (device should read "PIN Accepted")


Phone Unlock Instructions for Treo 650, 680, Centro:

1) Remove Treo battery, unplug cable
2) Insert incorrect a not allowed SIM card (one the phone does not accept)
3) Power on your Treo, 'Sim not allowed' is displayed, click OK
4) Go to the dial pad, and use the stylus to enter code *#*#CODE#. Then press 'Dial'. (substitute the word "code" with the unlock code we gave you).
5) Phone will reset and display 'sim lock removed'


Ensure you enter the codes in this manner *#*#CODE# (e.g. *#*#12345678#)

Troubleshooting
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.

If still having the error message "The SIM Lock has NOT been removed from this phone," the phone is likely refurbished and cannot unlock by code. Refurbished phones from the manufacturer are reflashed and take on a new IMEI. Because of this, the only way to unlock the phones is by software unlocking the phone.


 

Phone Unlock Instructions for Treo 750:

1) Power on with incorrect sim, enter unlock code when prompted
2) Enter code using ON-SCREEN (NOT physical keys) keyboard when unlocking a Pocket PC Phones

If above doesn't work

Wait for the next timout to complete. Then HOLD the white key button on the far left of the keyboard and then enter the unlock code with the PHYSICAL keys, not On-Screen.



Pantech Unlock Instructions

Phone Unlock Instructions for C3, C3B, C120, C300, C530 (Slate), C610, C630, C810 (Duo), C820 (Matrix Pro), C790 (Reveal):

1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone Unlocked

ISSUE PANTECH DUO (C810): Many times you may face an issue saying "This phone only accepts SIMs from specific networks, and has been blocked. Contact your customer service center for the unblock code. Unblock code:
___________
New pin:
___________
Confirm new pin:
___________



Phone Unlock Instructions for C150, C520 (Breeze), C740:

1) Put AT&T SIM card in C740
2) Turn on
3) Enter *#865625# on idle screen
4) SIM Unlock Process - Click Yes.
5) Enter 8 digits unlock code and click OK (soft key)
6) Re-enter the unlock code.
7) Unlock Process Complete
8) Click OK (soft key)

Pantech Ease p2020 unlocking instructions

1. POWER ON PHONE WITH A NON ACCEPTED SIM CARD
2. Phone will Prompt you to enter a Network Unlock Code
3. Input the 8 digit Unlock Code
4. Press Enter
5. The PHONE is now unlocked


OR


1. POWER ON PHONE WITH ACCEPTED SIM CARD
2. Press the following keys: *#865625#
3. A SIM Unlock Menu will appear, press OK
4. Enter Unlock Code (8 digit code)*
5. Re-enter Unlock Code (8 digit code)*
6. YOUR PHONE will display Unlock Process Complete. Press OK.
7. The PHONE is now unlocked
 

Samsung Unlock Instructions

NOTE: If you get more than one code for your Samsung here are the different types of Samsung codes:

NCK = Unlock Code
MCK = Unfreeze Code
SPCK = Special Code


If you enter a code and it shows 'Phone Freeze', this means the phone has been hard locked due to the number of wrong attempts. If you need the Freeze Codes, please contact us for prices.

How to Enter 'Phone Freeze' Codes
How to enter an UNFREEZE CODE:


Option 1 (Most Samsung phones)
1. Insert an unaccepted SIM card.
2. Enter the unfreeze code.
3. Press OK (either the left soft key, or in the middle of the touch-field)
Your handset may or may not display an unfreeze message
4. Now enter your unlock code depending of the lock level
Option 2 (if Option1 doesn't work)
1. Be sure to have the original SIM card in handset
2. Enter #7465625*638*UNFREEZE CODE
Phone will be Unfrozen
3. Input unaccepted SIM card into handset
4. Enter #7465625*638*UNLOCK CODE#
Your Phone should now unlock

----------------------------------------------------------------------
We provide four types of unlocking codes for each SAMSUNG IMEI:
- MCK: 8 digit UNFREEZE Code
- NCK: 8 digit Network Code
- SCK: 8 digit Subset Code
- SPCK: 8 digit SP Code

We strongly recommend to be 100% sure which lock level is present on your handset. Most of the times the SAMSUNG phones are only NCK lock enabled therefore most if the time you should only need to use this code. However some networks activate many locks in the same time or they may have just an alternative lock level such as SCK or SPCK.

To identify what type of lock has your SAMSUNG phone enter the *#7465625# code into your handset while it is turned on and connected to its locked network (E.g.: If your phone is locked to AT&T insert an AT&T SIM card into your handset, turn on and insert the code).
The phone will display a message similar to the following:
1. [xxx] Network lock
2. [xxx] Subset lock
3. [xxx] SP lock
(xxx = Value ON or OFF
How to enter specific unlock codes in SAMSUNG PHONES
Once you know which lock(s) is active, you can now enter the specific code for it.

  • If your phone says the SP lock is ON then you need to do this without a sim inserted:
    #7465625*77*SPCKCODE#
    or #SIMLOCK*SP*SPCKCODE#
  • If your phone says the Subset lock is ON then you need to do this without a sim inserted:
    #7465625*782*SCKCODE#
    or #SIMLOCK*SUB*SCKCODE#

If your phone says the NET lock is ON then you need to do this without a sim inserted:
#7465625*638*NCKCODE#
or #SIMLOCK*NET*NCKCODE#
Unlocking Instructions for Samsung SGH-a107

How to unlock Samsung SGH-a107:

  1. Insert a not accepted SIM Card and turn ON your Samsung SGH-a107.
  2. Phone will ask for a "Password".
  3. Enter the Unlock CODE you received
Note: In some instances the Samsung SGH-a107 won't ask for "Password" - enter the unlock code anyway.

OR if phone shows "Insert Correct SIM card"
  1. Insert a not accepted SIM Card and turn ON your Samsung SGH-a107.
  2. Type in #0111*CODE# where CODE is the Unlock CODE you received.
  3. Press the SEND key, display should read, "Personalization Canceled".
  4. Your Samsung SGH-a107 is now unlocked!
or

UNLOCK A107 Instructions
1. Turn ON your phone without Sim Card
2. Enter #7465625*638*Unlock Code#
3. Device should say "Network Lock Deactivated"
4. The phone may reboot and the unlock is completed
Unlocking Instructions for Samsung Flight II (SGH-A927)

How to unlock Samsung Flight II: (SGH-A927)


  1. Insert a not accepted SIM Card and turn ON your Samsung Flight II (SGH-A927).

  2. Phone will ask for a "Password".

  3. Enter the Unlock CODE you received
Note: In some instances the Samsung Flight II (SGH-A927) won't ask for "Password" - enter the unlock code anyway.

OR if phone shows "Insert Correct SIM card"

  1. Insert a not accepted SIM Card and turn ON your Samsung Flight II (SGH-A927).

  2. Type in #0111*CODE# where CODE is the Unlock CODE you received

  3. Press the SEND key, display should read, "Personalization Canceled".

  4. Your Samsung Flight II (SGH-A927) is now unlocked!

Phone Unlock Instructions for a BlackJack (i607/i617), Jack i637, or Samsung T939 (Behold 2)

1) Power on with Incorrect SIM
2) Phone will prompt for Network Pin
3) Use Code provided and press OK

ERROR MESSAGE: WRONG PASSWORD or INVALID CODE - If you receive one of these messages when entering the code for the Blackjack, the phone is likely to be refurbished. In cases like these, unlocking of the phone by code cannot be done, only by machine. Many cell phone shops do carry hardware devices (NsPro Box) to remove the unlock from the phones.

NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
1) Power on your Phone
2) Enter *#1546792*#
3) Select Option 3 Network & Call Settings
4) Select option 5 Network Mode
5) Select GSM

Samsung Exhibit 4G T759 Unlocking Instructions:
1. Input a non accepted sim card
2. Go to the unlock menu
3. Input the unlock code (NCK code) that was emailed to you
4. Phone is unlocked
Samsung Focus S Unlocking Instructions:

1. Input a non accepted sim card

2. Go to the unlock menu

3. Input the NCK unlock code that was emailed to you

4. Phone is unlocked!

* Some models may require a service provider code (sp code)

To unlock Samsung Galaxy S phone:
1. Turn on Phone With No Sim Card.
2. As If you were making a call Type #0111*UNLOCKCODE# (UNLOCKCODE IS THE NCK CODE WE EMAILED YOU)
3. Your phone is now unlocked for any Compatiable GSM network service provider

OR

To unlock Samsung Vibrant (Galaxy S) T959 phone:
1. Insert a not accepted SIM Card and turn ON your Samsung Vibrant.
2. Phone will ask for a "Password".
3. Enter the Unlock Code
Samsung i727 Galaxy S II Skyrocket Unlocking Instructions:

. Input a non accepted SIM card

2. Phone will display enter "SIM network unlock PIN"

3. Input the unlock code that was emailed to you

4. Phone is unlocked!

SAMSUNG GALAXY S 4G

1. Insert an unauthorized Sim Card into your phone.
(meaning a sim card different than the service provider the phone is currently locked to)

2. Turn on the phone and a box will pop up, this is where you enter the "NCK Unlock Code" that we sent you

3. Enter, The NCK unlock code
Samsung i897 Unlocking Instructions
1. Switch ON your phone with a not Accepted SIM Card
2. Phone will prompt you for Unlock Code
3. Now enter the Unlock Code
 

 

Phone Unlock Instructions for a Samsung A117, A137, A167, A177, A237, A257 (Magnet), A436, A437, A517, A637, A657, A707, A717, A727, A737, A747 (SLM), A757, A767 (Propel), A777, A787, A797 (Flight), A817, A827 (Access), A837 (Rugby), A867 (Eternity), A877 (Impression), A887 (Sostice), A897 (Mythic), C417, i907 (Epix), X497, ZX 10, ZX20, T219, T229, T239, T309, T319, T339, T349, T429, T439, T459 (Gravity), T469 (Gravity 2), T609, T639, T659 (Scarlet), T729 (Blast), T739, T749 (Highlight), T819, T919 (Behold), T929 (Memoir)

1) Power on without SIM card
2) Compose: #7465625*638*CODE# (by "CODE" I mean the unlock code I gave you)

Not Yet Personalized - If you see this message, it is another way of saying the phone is already unlocked. 

 

Phone Unlock Instructions for a A127, P207, P777, D307, D357, D407, D807, T539 (Beat), T629, Z105 and Z107:

1) Power on without SIM card
2) Compose: #0111*CODE# (by "CODE" I mean the unlock code I gave you)

Not Yet Personalized - If you see this message, it is another way of saying the phone is already unlocked. 

 

Phone Unlock Instructions for Samsung (all other models):

1) Switch ON your phone with a not accepted SIM card
2) Phone will ask for the "Password"
3) You can now enter the unlock code

Not Yet Personalized - If you see this message, it means your phone is already unlocked and your sim card is not activated or not functioning properly.

Sidekick Unlock Instructions

Phone Unlock Instructions for Sidekick (all models):

1) Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code.

2) The box will say:

Title: Special Code Required
Dialog: Enter code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel

3) In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It's unlocked. Enjoy.
In case you see the 'Waiting for Activation Screen', hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.

Siemens Unlock Instructions

Phone Unlock Instructions for C61, M56, S56, S66, SL56, SX56, SX66:

*#0001*yourunlockcode# or *#0000*yourunlockcode#

Sierra Wireless Unlock Instructions

Phone Unlock Instructions for Aircard 860, 875, 875u, 881, 881u, 885, 885u:

Please download and install Sierra Watcher. Once you have Watcher installed put the non-Cingular SIM into the card and Watcher will prompt you to enter the unlock code. Please make sure to enter the unlock code correctly.

If your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!



Sony Ericsson Unlock Instructions

How to Unlock Sony Ericsson Satio and Sony Ericsson Vivaz :



1 - Switch ON your phone without a SIM Card
2 - Compose #PW+CODE+1#
(where CODE is the unlock code you are sent by email)



Press the star (*) button repeatedly to make the P, W or + appear



How to Unlock Sony Ericsson X10 Xperia



1. Put in a sim card from a non accepted network
2. Turn on the phone
3. It will then request for an unlock code
4. Press the unlock code box with your finger and then the number pad will appear at the bottom of screen
5. Input the unlock code
6. Press "UNLOCK" button which is below the unlock code box on screen

Phone Unlock Instructions for Sony Ericsson Cell Phones (Most models):

1) For the unlocking of a locked Sony Ericsson no sim card is required.
2) Turn on the handset. Display will indicate 'Insert SIM.'
3) Press the left Arrow (<) button.
4) Press the star (*) button twice.
5) Press the left Arrow (<) button again.
6) You will briefly see one of the following messages listed on devices display: 'Personalized with MNC2' or 'Personalized with MNC3'.
7) Wait approximately three seconds.
8) The display will indicate 'Network' and a picture of a closed lock.
9) Press Select.
10) The display will indicate 'Unlock (Net) 5' and 'NCK:'
11) Enter the 16 digit NLCK4U code (unlock code we provided you) and press okay.
12) The handset will display 'Network unlocked' and the display 'Insert SIM' appears.
13) The handset is successfully unlocked.

NOTE:
1) When doing the first 5 Steps, you need to do it fast.
2) If you get NCK: (0), this means the phone is hard locked. The phone cannot be unlocked since there have been more than 5 wrong attempts.
3) If you have tried a few times and are getting 'Not Allowed', your phone cannot unlock due to too many wrong attempts made on the phone. Phone has been hardlocked.


Phone Unlock Instructions for TM506:

1) Insert a T-Mobile SIM into the device.
2) From the main screen, press the Navigation key left.
3) Press the Star * key.
4) Press the Star * key again.
5) Press the Navigation key left.
6) The handset displays Network Locked.
7) Select OK.
8) Enter the 16 digit SIM subsidy unlock code.
9) Select OK.

 

Unlocking Instructions for Sony Ericsson Z520a
  1. Power ON your Sony Ericsson Z520a with an accepted SIM Card.
  2. Press the LEFT arrow or joystick button once.
  3. Press the STAR (*) button twice.
  4. Press the LEFT arrow or joystick button again.
  5. You will briefly see one of the following messages listed on your Sony Ericsson Z520a display:
    • Personalized with MNC2
    • Personalized with MNC3
  6. Wait approximately 4 seconds.
  7. The display will indicate "Network" and a picture of a closed padlock.
  8. Press Select.
  9. The display will indicate "Unlock (Net) 5" and "NCK:"
  10. You can now enter the Unlock CODE
  11. Your Sony Ericsson Z520a will display "Network unlocked" and then "Insert SIM" message.
  12. Your Sony Ericsson Z520a is now unlocked!
If your Sony Ericsson Z520a has a Joystick (for example Sony Ericsson K700i), then you must press the DOWN Arrow instead of the LEFT Arrow for step 3 & 5. By DOWN Arrow I mean directing the Joystick down!
UT Starcom Unlock Instructions

Phone Unlock Instructions for UTStarcom (all models):

1) Insert AT&T SIM card into phone
2) From the phone pad dial *#865625# and it will prompt for the code.